A shower pan is the waterproof base that carries water to the drain, and when it fails the damage hides under tile or behind walls. Replacement usually means removing the shower floor and sometimes the walls. Call the number on this page to be connected with a local bathroom remodeler in Tampa.

What a pan replacement involves
The shower pan is the floor of the shower: a prefabricated acrylic or fiberglass base, or a site-built tiled floor with a waterproof liner. When it cracks, the liner tears or the drain seal fails, water gets under the base. Signs include a musty smell, stained ceilings below, soft or loose tile, and a floor that stays damp. A remodeler needs to open the shower and look before quoting.
Pan types and choices
- Prefabricated acrylic or fiberglass bases: fewer seams and a simple install.
- Solid-surface or stone-resin bases: heavier, with a more finished look.
- Tiled pan over a liner or sheet membrane: custom size and shape, and the usual route for curbless designs.
A shower compartment must be at least 900 square inches of interior floor area, 30 by 30 inches, according to the model code, so a pan swap cannot shrink the space below that. Confirm the rule with the permit office.
How the project runs
- Find the source of the leak and how far the damage goes.
- Demolish the old pan, tile and, if needed, the lower walls.
- Repair the subfloor and framing, then set the new pan or build the new liner and slope.
- Test by holding water in the pan before tile goes in, then finish the walls and trim.
Slab-on-grade homes in Tampa put the drain in concrete, so a changed drain position can mean cutting the slab. In older bungalows with wood floors, leaks often reach the framing below.
Cost
A Tampa cost guide lists shower drain replacement at $500 to $1,020 and acrylic or fiberglass shower inserts at $460 to $2,290. Tiled pans, water damage and rebuilt walls push the total higher, and a remodeler should price those after opening the shower.
Permits and licenses
The City of Tampa says removing and replacing fixtures or piping needs a trade permit. Hillsborough County lists moving or replacing pipes and valves as permitted, and cutting into a wall as well. Tile work is exempt, but the drain work is not. DBPR says plumbing needs a state contractor license, so look up the license number at MyFloridaLicense.com before any deposit. Florida's deposit rule also requires a contractor who takes more than 10 percent up front on residential work to apply for permits within 30 days, unless no permit is required.
Shower Pan Replacement questions from Tampa homeowners
How do I know if my shower pan is leaking?
How much does shower pan or drain work cost in Tampa?
Can the pan be replaced without removing the tile?
Does shower pan replacement need a permit?
Related bathroom remodeling services in Tampa
Helpful guides
Shower Pan Replacement in nearby cities and towns
Hillsborough County
Pinellas County
Pasco County
Hernando County
Polk County
Manatee County
Sources
Last updated: