Preparation is most of the job: cleaning off soap and mineral scale, sanding or etching the glaze, repairing chips, masking the room and then applying the coating in thin layers. Call the number on this page to be connected with a local bathroom remodeler in Lithia.

Good candidates for refinishing
- Dull, rough or stained enamel
- Small chips and light rust spots
- An outdated color you want to change
- A tub in sound shape with intact walls
If these describe your tub, a resurface may serve you well, but only after an inspection confirms the tub is sound underneath the surface wear.
How the coating goes on
After prep, the tub is dried, masked and sprayed in thin coats, usually with time between layers. The result is a hard, glossy finish. A steady hand and clean air matter, because dust or drips in the coating cannot be ignored once it hardens.
Permits and paperwork in Lithia
Because Lithia has no city government of its own, permits for remodel work come from Hillsborough County Building Services.
What Hillsborough County Building Services says about this kind of work: Floor tile and painting are exempt; moving or replacing pipes, valves or fixtures, cutting into a wall or partition, or replacing concealed pipe needs a permit. Same-spot toilet reseat and leak fixes are exempt.
Before signing, search the company's name on Florida DBPR's online license lookup and confirm the permit will be in the contractor's name, not yours.
For bigger remodels, Florida's lien law uses a recorded notice of commencement; the contractor or the permit office can tell you whether your job needs one.
Because Lithia is farther from the core of the metro, scheduling can take a little longer and some companies add a travel charge; ask when you call.
Nearby, the same kind of help is available in Valrico, Riverview and Brandon.
Why quotes differ
A low quote may skip proper prep or use thin coats, while a higher one includes thorough cleaning, repair and quality materials. Ask what is covered, how many coats are applied, how the old finish is prepared and what the contractor does to protect the room.
Protecting the room
Masking tape and plastic cover the walls, floor and fixtures, so nothing gets overspray. Floors and nearby cabinets should be covered too. Ask how the remodeler protects finishes, what cleanup they do before leaving, and who removes the masking and trash.
Check the plan for the room
Ask how the room will be masked, how long the tub is off-limits, what needs to be removed beforehand and how the fumes will be handled. Get answers before the day of the job so you can plan the day around it in Lithia and arrange a second bathroom if needed.
Bathtub Refinishing questions in Lithia
How long does refinishing take?
Is there a smell during refinishing?
When should I replace instead of refinish?
How do I check a contractor's license?
More bathroom remodeling services in Lithia
Bathtub Refinishing nearby
Helpful guides
Sources
- Hillsborough County Development Services (Building Services)
- Hillsborough County Development Services (Building Services): floodplain rules
- Florida DBPR: verify a license
- Florida Statutes s. 713.13: notice of commencement
- FEMA: substantial improvement / substantial damage
- EPA: lead renovation, repair and painting rule
Last updated: