Bathroom remodeling referrals for Tampa & nearby townsCall: (813) 536-3668
(813) 536-3668

Tub to Shower: Is a Conversion Right for Your Home?

bathroomremodeltampa.net

Replacing a bathtub with a shower is one of the most common bathroom changes in Tampa Bay, especially in hall baths and older homes. This guide covers who it suits, the resale question, what changes behind the wall, cost ranges and the permit and license checks.

Need bathroom remodel help now?
Call now to be connected with a local bathroom remodeler in Tampa.
(813) 536-3668

Replacing a bathtub with a shower is one of the most common bathroom changes in Tampa Bay, especially in hall baths and older homes. This guide covers who it suits, the resale question, what changes behind the wall, cost ranges and the permit and license checks.

Why people convert

The usual reasons are simple. A tub with a high wall is hard to step over, many owners use only the shower, and a bigger shower makes a small bathroom feel more open. Garden tubs that came with 1990s master baths now take up floor space and collect dust. Retirees and owners planning to stay in a house for years often want a walk-in shower with a low threshold and grab bars. Others convert because the old tub or surround leaks and a full replacement is coming anyway.

A conversion is not for everyone. If you have one tub in the house and small children, or you expect to sell soon, the tub may be worth keeping. Think about who uses the bathroom today, who will use it in five years and what the house needs to offer a future buyer.

The resale question

Buyers with young children often look for at least one tub in a home. A common approach is to keep a tub in one bathroom, usually a hall or guest bath, and convert the primary bath to a large shower. If the only tub in the house is the one you are removing, talk to a local real estate professional about how buyers in your neighborhood respond. Price, neighborhood and buyer type vary across Tampa, Brandon, Riverview, Wesley Chapel and the coastal towns, and no guide can settle it for you.

What changes behind the wall

Swapping a tub for a shower is more than removing a fixture. A tub drain sits at a different spot from a shower drain, and a tub spout and valve are set at different heights. Most conversions involve:

  • Demolition of the tub and surround, and often the wall finish around it.
  • A new shower drain location and trap. In a slab-on-grade home, which describes much of Tampa Bay, moving a drain means cutting into the concrete slab, running new pipe and patching. That adds labor and is the largest cost swing in many conversions.
  • A new valve and shower head, with the valve set at a comfortable height.
  • A new floor: a pan or a built-up, waterproofed floor with a slope to the drain.
  • New wall finish, either tile over waterproofing or panels.
  • A door, curtain or open design, plus a fan check.

If the drain can stay where the tub drain was, a conversion is simpler. Some showers are designed to use that existing location. Ask the remodeler whether they plan to relocate the drain and what that means for the price.

Pan and wall choices

Showers fall into two broad families. A prefabricated base and surround in acrylic or fiberglass goes in faster and has fewer seams to seal. A custom shower with a tiled floor and walls looks more tailored, but needs careful waterproofing and a clear slope to the drain. Angi's national walk-in shower page lists a manufactured pan at roughly $250 to $400 and a custom curbless pan at about $2,500 on average. A curbless entry requires the floor to be recessed or sloped, which can mean more framing and slab work; see our curbless and walk-in shower guide for how that works.

Size matters for comfort and code. The model residential code, IRC P2708.1, states that a shower compartment must have at least 900 square inches of interior floor area, which is 30 by 30 inches. An open walk-in shower over 70 inches tall with no door or curtain needs at least 36 inches in each direction. Many standard 60-inch tub alcoves leave room for a shower that is larger than the minimum, often 60 by 30 inches or deeper if you borrow space.

Glass near a shower also has a rule. IRC R308.4.5 treats glass as a hazardous location when its bottom edge is less than 60 inches above the standing surface and within 60 inches horizontally of the tub or shower, so it must be safety glazing such as tempered glass. A shower door or glass panel built for that purpose meets it; an ordinary window low on the wall needs attention. Our shower door installation page covers glass options.

Cost ranges

Costs depend on the drain, the pan, the walls and the finish level. Angi's Tampa shower installation page lists tub-to-shower conversion at about $1,375 to $9,160. A Tampa contractor's own pricing, published on its cost guide, lists conversions at about $8,000 to $18,000. The gap is real: the lower range tends to reflect prefabricated bases and simple scopes, and the higher range reflects tile, glass and plumbing changes. Treat both as published ranges for planning, not quotes. For the bigger picture, see our Tampa bathroom remodel cost guide.

Fixr's national figures put walk-in shower installation at about $5,000 to $11,000 with an $8,000 average. If a conversion also becomes a walk-in design, compare against those numbers and ask for line items that separate demolition, plumbing, waterproofing, tile and glass.

Permits and the license check

Because a conversion changes plumbing, many building offices expect a permit, although the rule differs by office. Our permit guide explains how to find the right office for your address. A home in a FEMA flood zone adds another question: if proposed work costs 50 percent or more of a structure's market value, it is a substantial improvement, and local officials make that call before work begins. A single conversion rarely reaches that number alone, but some offices count work cumulatively. The flood zone guide covers it.

Florida requires plumbing work to be done under a state license. DBPR lists plumbing among work that requires one, including connecting lines to potable water. Tile and cabinet installation are among tasks DBPR says do not need a state license, but a conversion usually includes plumbing, so the prime contract needs a license holder. Ask for the license number and look it up on MyFloridaLicense.com; the guide to hiring a bathroom remodeler in Florida lists the checks. If the home was built before 1978, EPA's lead-safe rules apply to paid work that disturbs painted surfaces, and window replacement and demolition are never treated as minor repairs.

Safety and aging in place

If safety is part of the reason, plan for it now. CDC STEADI's Check for Safety tips include a non-slip mat or strips in the tub or shower, grab bars beside and inside the tub, and a grab bar beside the toilet. ADA standards cover public bathing rooms, not private homes, but they give useful reference numbers: grab bars at showers and tubs are mounted 33 to 36 inches above the floor, and a transfer shower is 36 by 36 inches. Adding blocking inside the wall during the conversion costs little compared with opening the wall later. Fixr lists grab bar installation at about $85 to $300, with wall reinforcement adding $100 to $150. Read our aging-in-place bathroom guide for planning ideas, or visit the accessible bathroom remodel page.

Deciding

A conversion makes sense when the tub is rarely used, the bathroom is small or dated, or mobility is a concern. Hold off if the tub is the only one in the home and resale is near, or if the slab work behind the drain would push the budget past what the bathroom adds. Ask for two bids with the drain location written out, since that single line explains much of the price difference.

Call now to be connected with a local bathroom remodeler in Tampa.
(813) 536-3668

Bathroom Remodel Tampa is a referral service, not a remodeling company. When you call, you are connected with an independent local bathroom remodeler who can look at your slab, your wall and your layout. See the Tampa tub-to-shower conversion page for how these projects are usually scoped, or the walk-in shower installation page if you want a larger open design. Published ranges and code summaries here are general information, and your permit office confirms what applies at your address.

Frequently asked questions

How much does a tub-to-shower conversion cost in Tampa?
Angi's Tampa shower installation page lists about $1,375 to $9,160, and a Tampa contractor's published pricing lists about $8,000 to $18,000. These are planning ranges, not quotes, and a moved drain in a slab home pushes a job toward the high end.
Do I need a permit to convert a tub to a shower?
A conversion changes plumbing, so many building offices expect a permit, but rules differ by office. Ask the building office that covers your address before work starts.
How big does a shower need to be under the model code?
IRC P2708.1 states at least 900 square inches of interior floor area, which is 30 by 30 inches. An open walk-in shower over 70 inches tall with no door or curtain needs at least 36 inches in each direction. Confirm the edition in force with your permit office.
Will removing the tub hurt resale?
It can, if it is the only tub in the house and buyers in your area want one. Many owners keep a tub in a hall or guest bath and convert the primary bath. A local real estate professional can speak to your neighborhood.
Why does moving the drain cost so much?
In a slab-on-grade home, a new drain location means cutting the concrete slab, running new pipe and patching the slab. If the shower can use the old tub drain location, the job is simpler.
Call now to be connected with a local bathroom remodeler in Tampa.
(813) 536-3668

Last updated:

☎ Call (813) 536-3668